collapse

* Posts Recentes

Amplificador - Rockboard HA 1 In-Ear por almamater
[Ontem às 19:13]


O que é isto ? por KammutierSpule
[26 de Março de 2024, 19:35]


Bateria - Portátil por almamater
[25 de Março de 2024, 22:14]


Emulador NES em ESP32 por dropes
[13 de Março de 2024, 21:19]


Escolher Osciloscópio por jm_araujo
[06 de Fevereiro de 2024, 23:07]


TP4056 - Dúvida por dropes
[31 de Janeiro de 2024, 14:13]


Leitura de dados por Porta Serie por jm_araujo
[22 de Janeiro de 2024, 14:00]


Distancia Cabo por jm_araujo
[08 de Janeiro de 2024, 16:30]


Meu novo robô por josecarlos
[06 de Janeiro de 2024, 16:46]


Laser Engraver - Alguém tem? por almamater
[16 de Dezembro de 2023, 14:23]

Autor Tópico: Duvida - Upload do blink para o Arduino  (Lida 5186 vezes)

0 Membros e 1 Visitante estão a ver este tópico.

Offline metRo_

  • Administrator
  • Mini Robot
  • *****
  • Mensagens: 3.753
Re: Duvida - Upload do blink para o Arduino
« Responder #15 em: 05 de Janeiro de 2011, 17:45 »
http://arduino.cc/en/Guide/Windows

Citar
4 | Install the drivers
Installing drivers for the Arduino Uno with Windows7, Vista, or XP:
-Plug in your board and wait for Windows to begin it's driver installation process.  After a few moments, the process will fail, despite its best efforts
-Click on the Start Menu, and open up the Control Panel.
-While in the Control Panel, navigate to System and Security. Next, click on System. Once the System window is up, open the Device Manager.
-Look under Ports (COM & LPT).  You should see an open port named "Arduino UNO (COMxx)"
-Right click on the "Arduino UNO (COmxx)" port and choose the "Update Driver Software" option.
-Next, choose the "Browse my computer for Driver software" option.
-Finally, navigate to and select the Uno's driver file, named "ArduinoUNO.inf", located in the "Drivers" folder of the Arduino Software download (not the "FTDI USB Drivers" sub-directory).
-Windows will finish up the driver installation from there.