LusoRobótica - Robótica em Português
Sistemas específicos => Arduino / AVR => Tópico iniciado por: bmventura em 27 de Janeiro de 2014, 17:17
-
Boa tarde,
estou com um pequeno problema com esta
placa chipKIT Basic I/O Shield.
Não consigo aceder a todos os Slide switches/push-buttons.
Apenas consigo aceder ao BTN1 e aos SW1,2,3.
Por exemplo para aceder ao BTN2:
const int buttonPin = 34; // the number of the pushbutton 2
const int ledPin = 13; // the number of the LED pin
// variables will change:
int buttonState = 0; // variable for reading the pushbutton status
void setup() {
// initialize the LED pin as an output:
pinMode(ledPin, OUTPUT);
// initialize the pushbutton pin as an input:
pinMode(buttonPin, INPUT);
}
void loop(){
// read the state of the pushbutton value:
buttonState = digitalRead(buttonPin);
// check if the pushbutton is pressed.
// if it is, the buttonState is HIGH:
if (buttonState == HIGH) {
// turn LED on:
digitalWrite(ledPin, HIGH);
}
else {
// turn LED off:
digitalWrite(ledPin, LOW);
}
}
O que é que estou a fazer mal?ou se está a faltar-me instalar
alguma library?
Já não trabalho com esta placa à uns meses,
mas já tinha usado os botões noutro projecto.
Cumprimentos
Bruno