collapse

* Posts Recentes

+ LASERs por dropes
[03 de Julho de 2025, 19:35]


Cerca eléctrica por SerraCabo
[14 de Junho de 2025, 23:26]


Alguém arranja motores? por almamater
[10 de Junho de 2025, 22:34]


Condensador 4.7uF 0603 por brunus
[09 de Junho de 2025, 15:52]


Lenovo IdeaPad 3 Não liga por jm_araujo
[07 de Maio de 2025, 19:10]


Identificar Diodo Zenner por filjoa
[01 de Maio de 2025, 23:07]


Meu novo robô por dropes
[18 de Março de 2025, 14:51]


JBL partybox On-The-Go por almamater
[21 de Fevereiro de 2025, 23:32]


Talking Reverse Engineering with an Absolute Legend! por SerraCabo
[13 de Fevereiro de 2025, 09:56]


Motoserra Stihl 120C por brunus
[11 de Fevereiro de 2025, 16:29]

Autor Tópico: Duvida - Upload do blink para o Arduino  (Lida 8889 vezes)

0 Membros e 1 Visitante estão a ver este tópico.

Offline metRo_

  • Administrator
  • Mini Robot
  • *****
  • Mensagens: 3.753
Re: Duvida - Upload do blink para o Arduino
« Responder #15 em: 05 de Janeiro de 2011, 17:45 »
http://arduino.cc/en/Guide/Windows

Citar
4 | Install the drivers
Installing drivers for the Arduino Uno with Windows7, Vista, or XP:
-Plug in your board and wait for Windows to begin it's driver installation process.  After a few moments, the process will fail, despite its best efforts
-Click on the Start Menu, and open up the Control Panel.
-While in the Control Panel, navigate to System and Security. Next, click on System. Once the System window is up, open the Device Manager.
-Look under Ports (COM & LPT).  You should see an open port named "Arduino UNO (COMxx)"
-Right click on the "Arduino UNO (COmxx)" port and choose the "Update Driver Software" option.
-Next, choose the "Browse my computer for Driver software" option.
-Finally, navigate to and select the Uno's driver file, named "ArduinoUNO.inf", located in the "Drivers" folder of the Arduino Software download (not the "FTDI USB Drivers" sub-directory).
-Windows will finish up the driver installation from there.